CPCDiskAdapter by LambdaMikel-
CPCDiskAdapter by Michael Wessel is an universal Floppy Disk Drive Adapter for the Amstrad CPC. It's a PCB which lets you connecting disk drives other than the standard Amstrad DD1 / FD1 drives to the CPC via the disk controller, which usually requires some floppy cable mods. Moreover, these mods usually fix the drive to either being CPC A or B drive.
With this adapter board, one can flexibly use the DIP switches to select 2 out of 3 possible disk drives, and flexibly determine which one is A or B. Moreover, no more (destructive) cable mods are required with this board.
The following drives can be used:
- the standard Amstrad DD1 / FD1 3" floppy
- standard PC 3.5" floppy (with READY signal if possible)
- 5.25" floppy (with READY signal if possible)
- Gotek floppy drive
If the drive does no emit the READY signal, then it can be "faked" by grounding the READY line with the corresponding READY DIP switch (this is a standard CPC floppy cable hack)