Archives du mois février 2017 sur Genesis8 Amstrad Page







Test du jeu Advanced Pinball Simulator (Codemasters) par ChinnyVision

-

Une nouvelle vidéo par ChinnyVision sur Youtube d'Advanced Pinball Simulator est disponible. Ce jeu de flipper a été créé par Codemasters en 1988 sur Amstrad CPC.

Le test traite également des versions Spectrum, C64 et Atari XL/XE.




FPGAmstrad sur la carte MiST revision r005.8.13e par Renaud Helias (émulateur Amstrad CPC)

-

Le MIST est un Circuit logique programmable (FGPA en anglais) qui permet d'implémenter au niveau matériel des ordinateurs classiques 16bit comme les Amiga et Atari ST(E). Mais il peut également émuler des ordinateurs 8 bit comme les Atari XL, ZX81, ZX Spectrum, C64, Atari VCS, Atari 5200, Colecovision, Apple II, Sega Master System, NES, Odyssey2 et bien sûr l'Amstrad CPC.

Renaud Helias a écrit un coeur Amstrad CPC 6128 pour cette carte Mist. La dernière version de ce coeur permet entre autre d'émuler correctement la démo Still Rising par Vanity.




C4CPC et Nocart, de la vitamine pour Amstrad CPC+ et console GX4000

-

Honte sur moi, je n'avais pas encore écrit sur le C4CPC qui est l'équivalent du HXC disk emulator (émulateur SD du lecteur de disquettes) mais cette fois-ci pour le lecteur de cartouches des Amstrad CPC+ et console GX4000, une interface créée par Gerald.

ATTENTION, utiliser le C4CPC avec une console GX4000 et son alimentation originale vous donnera un presse-papier, pour l'explication c'est ici.

Et bien sûr, avec l'impression 3D, certains ne se sont pas privés d'en faire quelque chose de plus esthétique :

Nocart v1.4 pour windows vous permettra de convertir presque tous les programmes Amstrad CPC en un fichier .CPR (image de cartouche) qui sera utilisable par le C4CPC. Certains jeux Amstrad CPC pourront ne pas fonctionner, le symptôme est le clavier qui ne réponds pas aux frappes, c'est que le jeu doit être patché pour respecter le firmware des CPC+




Amstrad CPC story Par Nostalagia Nerd sur Youtube (partie 2), l'histoire d'Amstrad (in english)

-

Et voici la suite par Nostalgia Nerd : Amstrad CPC story partie 2.




Amstrad CPC story (partie 1) par Nostalagia Nerd sur Youtube, l'histoire d'Amstrad (in english)

-

Vu gràce à TuYaTroJoueY sur Twitter, une video sur youtube par Nostalgia Nerd : Amstrad CPC story partie 1.

Pour arriver à la partie traitant de l'Amstrad CPC, avancez à 10 minutes et 30 secondes, mais le début est intéressant, je vous le conseille.




Les étiquettes des disquettes Amstrad CPC 3 pouces en 600 DPI par les Crackers Velus

-

Les Crackers Velus ont scannés les étiquettes de différentes marques de disquettes Amstrad CPC 3 pouces. Parmli le lot ci-dessous, il y en aura bien une qui fera votre bonheur.

Merci à eux.

étiquette de disquette Tatung 3 pouces étiquette de disquette Amsoft 3 pouces étiquette de disquette Panasonic 3 pouces étiquette de disquette sans marque 3 pouces étiquette de disquette Schneider 3 pouces étiquette de disquette Maxell 3 pouces



El Linaje Real, un jeu de plate-forme Amstrad CPC par ESP Soft en avril 2017

-

El Linaje Real est le prochain et premier jeu Amstrad CPC de l'année 2017 par ESP Soft.

C'est un jeu de plate-forme en 5 niveaux qui devrait sortir en avril 2017. Le jeu est déjà fini et est en cours de test pour débusquer les derniers éventuels bugs. Vous y testerez votre habilité à l'épée avec plusieurs moyens de locomotion (à pied, à cheval, à bateau). Et il n'y aura pas qu'une seule façon de finir le jeu.




Barbarian en speedrun par JB le Daron

-

JB Le Daron est une chaine Youtube sur laquelle je suis tombé. Dans ce premier épisode il aborde le sujet du speedrun : finir un jeu le plus rapidement possible, ce que l'on voit sur d'autres ordinateurs 8bit (et consoles), mais rarement voir jamais à ma connaissance sur Amstrad CPC. Et c'est le jeu Barbarian de Palace Software (1987) que vous allez voir en vitesse rapide.

Après voir lu la vidéo, il semble qu'il y ait sur CPC-Power qu'on ne présente plus des fichiers SNR qui sont des séquences de jeu (speedrun ou non ?) en téléchargement que l'on peut lire avec l'émulateur WinAPE.

Saurez-vous battre le jeu Barbarian en moins de 6 minutes et 12 secondes, record de Kukulcan (webmestre de CPC-Power) ? Voir la vidéo à partir de 6 minutes pour le speedrun.








FPGAmstrad sur la carte MiST revision r005.8.14 par Renaud Helias (émulateur Amstrad CPC)

-

Une nouvelle version du coeur Amstrad CPC par Renaud Helias pour MiST est disponible.

  • IO_ACK trigger in edge, not in state (better in some scrolling...)
  • WAIT_n generator ignoring M1 while IO_ACK
  • OSD entry : "MEM_wr" mode : quick or slow. quick by default.

Rapide : Arkanoid II, Prehistoric II. Ecole demo. Pinball Dreams
Lent : Saboteur 2. Still Rising demo.




Amstrad Eterno 2017, le 18 mars 2017 à Barcelone

-

Amstrad Eterno 2017 est un meeting Amstrad CPC ayant lieu à Barcelone (Espagne) la journée du 18 mars 2017.

Voir également la page facebook d'Amstrad Eterno.

Amstrad Eterno le 18 mars 2017 à Barcelone (Espagne)



Vasm v1.7h, un compilateur assembleur portable et multi plateforme

-

Vasm v1.7h est un compilateur en sources pour plusieurs plateformes :

  • Unix
  • AmigaOS 68020
  • Atari MiNT 68020
  • MorphOS
  • AmigaOS4
  • PowerUp
  • Atari TOS 68000
  • WarpOS
  • Windows

And of course, it can compile Z80 assembler, but it's not the only processor it can manage.



RetroGaming Play 2017 à Meaux (77) samedi 18 et dimanche 19 février

-

Venez découvrir le festival du jeu vidéo rétro et Alternatif : Le RetroGaming Play ! (RGP)

Ce sont les 18 et 19 Février prochain, à moins de 30 min de Paris à Meaux (77), que l'association RGC (avec Replay et ChezmoA) organise ce rendez-vous festif et convivial !

Ce festival sera l'occasion de mettre en avant la culture du jeu vidéo et pour cela nous vous proposerons des expos, du Freeplay, des animations, de l'arcade, des tournois des Quizz, un espace vente, des conférences et bien sur une grande dose de passion !

Sur place, nous auront la présence de :

  • AHL (rédacteur en chef, journaliste Tilt, Joypad, Console + et Gameblog) -> "Ses années Presses et Jeux"
  • Bertrand Brocard (Éditeur/créateur, Cobrasoft, directeur du CNJV) ->"son histoire"
  • Florent Gorge (journaliste spécialisé, animateur chez Nolife, fondateur de la société Pix'n Love) -> "Space Invaders, le jeu révolutionnaire"
  • Abrial Da Costa (Microids, Elektrogames, The Digital Lounge ...) - >"Another World, des débuts à la dernière version"
  • Douglas Alves (journaliste, Historien du JV) -> "L'histoire du jeu vidéo"

Nous aurons aussi sur place un pôle Youtubeurs/Streamer (avec Keydee, AtOmium et Psychodélik) afin que cette nouvelle façon de vivre le jeu vidéo soit aussi représentée !

Si cette convention vous intéresse, nous serions ravis de votre venue et n'hésitez pas à nous contacter pour toutes questions ou propositions éventuelles.

Page Facebook du RGP

Site du RGP



Y'a pas que l'Amstrad dans la vie S2E10 : Gryzor / Contra

-

Une autre chaine Youtube : celle de Khomenor, tout comme ChinnyVision il ne teste pas que la version Amstrad CPC mais aussi sur d'autres ordinateurs. Pour ce qui est de Contrat / Gryzor, il faut savoir qu'il n'est sorti que sur ordinateurs 8bit, pas de 16 bit.




Test du jeu Amstrad GX4000 Navy Seals (Ocean, 1990) par ChinnyVision

-

Une nouvelle vidéo par ChinnyVision sur Youtube de Navy Seals en cartouche pour Amstrad CPC+ et GX4000 est disponible. Ce jeu d'arcade a été créé par Ocean en 1990 sur cartouche.

Le test traite également des versions Spectrum, C64, Atari ST et Amiga.




Test de l'assistant personnel Amstrad PenPad PDA600 par ChinnyVision

-

Une fois n'est pas coutume, ChinnyVision ne teste pas pas un jeu, mais bel et bien l'Amstrad PenPad PDA600, un assistant personnel capable de reconnnnaître l'écriture manuscrite avec son processeur Z180.

Demain il est censé tester un Amstrad Notepad NC100.






Test de l'ordinateur portable Amstrad Notepad NC100 (modèle anglais) par ChinnyVision

-

Un autre test matériel par ChinnyVision, celui de l'ordinateur portable Amstrad Notepad NC100 sorti en 1992, qui a existé aussi en français et italien (Notepad NC150) et bien sûr le Notepad NC200 avec lecteur de disquette intégré en 1993.

L'Amstrad Notepad NC100 a un processeur Zilog Z80 comme l'Amstrad CPC et PCW, 64 Ko de RAM avec un port série RS232C, un port imprimante, un port PCMCIA pour ajouter une carte mémoire (1 Mo maximum). L'écran LCD a 8 lignes de 80 caractères (480 x 64 pixels). Utilisé avec 4 piles AA, le NC100 peut durer environ 20 heures. Le manuel anglais de Notepad NC100 est disponible en téléchargement.

Ses fonctionnalités sont :

  • traitement de texte Protext (existe déjà sur Amstrad CPC et PCW)
  • tableur (seulement sur NC150 et NC200)
  • journal intime (traitement de texte avec prise en compte de date)
  • carnet d'adresse
  • alarmes
  • calculatrice
  • interpréteur basic BBC
  • jeux (seulement sur NC150 et NC200)

Le notepad Amstrad NC100 peut être utilisé avec l'interface/os original ou avec ZCN de Mark Russel qui est une implémentation de CP/M native, ou bien utiliser Fuzix qui est un unix système 5 par Alan Cox. Vous pouvez émuler un Amstrad NC100 (mais également NC150 et NC200) avec nc100em (toujours de Mark Russel) pour linux ou ms-dos et pour windows (port par Stefano Bodrato). L'émulateur MESS supporte également les 3 notepad NC. Si vous n'avez pas la ROM originale du NC100, il faudra utiliser le fichier ZCN.BIN inclus dans ZCN v1.3. Vous trouverez plus d'informations sur la famille des Notepad NC sur l'excellent site Tim's Amstrad NC users site (sur lequel vous trouverez des programmes NC100 en téléchargement) dont cette page sur ZCN.

D'autres vidéos youtube à propos d'Amstrad Notepad NC computers :




FitoWestBank par Adolfito, un remake windows du jeu Amstrad CPC West Bank (janvier 2016)

-

West Bank est un jeu d'arcade espagnol pour Amstrad CPC sorti en 1987 par Dinamic Software. Une version anglaise est sortie en 1987 éditée par Gremlins Graphics. Trois portes en faces de vous, saurez-vous assez rapide pour tirer sur les bandits sans blesser un innocent ?

Je viens de tomber sur FitoWestBank sur SourceForge qui est un remake windows par Adolfito. J'avais manqué son annonce sur CPCWiki (voir la source plus bas).

Couverture du jeu Amstrad CPC West Bank par GameBase CPC





Le remake du jeu Amstrad CPC Sorcery + sous windows (XP à 10) par Antibug

-

Antibug a recompilé son remake Sorcery+ pour windows XP à 10. Il dispose des graphismes originaux du jeu.

Profitez sur sa page de la solution du jeu en JPG ou PDF.




Réparation d'un Amstrad Notepad NC200 en photos par CE (et des remerciements en vrac)

-

Avec la permission de C-E (sans les caractères ascii), ce qui suit est un copier/coller d'un message sur CPCWiki à propos de la réparation d'un Amstrad NC200 agrémenté de plusieurs photos. Merci à C-E.

Je tiens à remercier également tous les utilisateurs des forums Amstrad que je consulte (CPCwiki, CPCRUlez, Amstrad.ES, Amstrad.EU, etc...), les Youtubbers pour leurs vidéos, ceux qui écrivent des programmes pour nos ordinateurs Amstrad ou ceux qui fabriquent des extensions matérielles pour eux. Sans vous ce site n'existerait pas ou serait dramatiquement désert. Merci donc à tous ceux qui continuent à faire vivre les ordinateurs Amstrad plus de 30 ans après leur création.

I recently bought and old and battered NC200 that I plan to use every day as a glorified programmable calculator and diary in the lab. I wanted to have one since long ago but prices were a bit too high so when this unit appeared on e-bay for 10 pounds I went for it. It was described as "For parts or not working" due to the faulty keyboard but I thought that if the motherboard and the display were in reasonable condition it should be possible to repair everything else. This thread is about how it was brought back to life. I know that the NC200 is not a very common machine but maybe some of you will find this description useful or, at least, funny :) . The pics in the thread are quite massive, by the way, but not so heavy.

Below you can see the computer when I received it. It seems that in 1997 it was brought to some sort of technical service because the space bar was not working anymore. In there, they said that it was not possible to repair it and the NC200 went back to its owner. It was probably laying around since then, until they decided to get rid of it. I know that many of these machines were actually not used very often, but this is not the case. Whoever had it first worked with the laptop a lot: you can see marks here and there and a few shiny keys.

front of an Amstrad Notepad NC200  Amstrad Notepad NC200 open, screen and keyboard visible

The first thing I did was to power it on and check that, as the seller said, the keyboard was actually not working properly. The display was fine besides the backlight, that turned out to be extremely dim. There was also a decent layer of crap covering it.

The second thing was to disassemble the machine. It is quite easy. You have 5 screws on the bottom and a few clips on the keyboard region. Take the screws first and then lift the case a little bit in a careful way. The clips from the keyboard can be released introducing a little plastic sheet in the gap between the two shells and moving it around, or even with your fingers. In any case, be careful not to damage the case around the keyboard, this computer had been opened in the past in a very clumsy way and there was already a small crack that I had to repair with epoxy resin (more of this at the end). You can see four of the five screws to be removed in the next image. The last one is inside the battery compartment. They have different sizes, remember their original position.

back of an Amstrad Notepad NC200

Once you remove the upper part of the case you have to disconnect the cables that go to the screen. Be careful, the white one is short.

keyboard of an Amstrad Notepad NC200 with the screen removed

It is time to take out the floppy drive, the motherboard and the keyboard. There are a few screws holding everything in place.

keyboard of an Amstrad Notepad NC200 without the floppy drive

The external structure of the keyboard is similar to the one found in many other Amstrad. To open it you need to remove 3 screws and release a few clips.

removing crews to go at the Amstrad Notepad NC200 keyboard

In my case the membrane was extremely dirty. It seems that some liquid fell onto the keyboard in the past and entered between the two layers sticking them together. I used isopropanol to dissolve the crap and give it a good clean. Luckily, the solvent did not affect the fused plastic that joins the two layers, otherwise it would have been necessary to re-glue them. It seems obvious but when you see that two layers of a membrane are stuck by something that dried between them you should never try to separate them by pulling. There is very decent chance to damage the tracks.

Below is how it looks after the cleaning. Some of the silver is darker because there was some oxidation going on, but this does not affect conductivity or makes the tracks more prone to break. The oxide layer is extremely thin. In case of broken or corroded tracks it would have been necessary to reconstruct them with silver paint. This can happen if acid liquids, like orange juice, are spilled on the machine.

membrane of the Amstrad Notepad NC200 keyboard

Now onto the keyboard itself. There was nothing important here. The only thing that was out of place was the clip that makes the SPACE bar to go down uniformly when you press it. I put it back in place and cleaned the keyboard with lots of KH7 and water. Everything is made of plastic besides the metal clips, so no worries about oxidation. After cleaning you just need to manually dry the clips and let the rest dry by itself. If you do not dry them it is fine too, but I like to do it.

keyboard of an Amstrad Notepad NC200 without the space key

Time to reassemble the keyboard. We do not have nice springs, like in the CPC range, but rubber domes with the same function. I do not like this solution because it changes the keyboard feeling and the domes look a bit on the fragile side, but I must say that they are still in perfect condition. Maybe Amstrad engineers were not so wrong after all.

rubber domes of the Amstrad Notepad NC200 keyboard

The next thing was the backlight. The NC200 is reported to have a bright backlight that, in my case, was extremely dim. I asked Bryce about the backlight on his unit but, before he could check, I decided to replace the caps in the board and the light came back clear and strong. It seems that one or more of them went bad over time and this was giving the circuit a hard time. Replacing the caps is easy and their values completely common (sorry, I trashed the note where I wrote them). It should be a relatively simple task if you have some soldering skills but there is a very important thing to remember: some of them NEED to be low profile. Look at the picture below, it is the mainboard with the new caps. THE ONES MARKED WITH RED ARROWS NEED TO BE SHORT, otherwise you will not be able to re-install the floppy drive or close the case.

mainboard of the Amstrad Notepad NC200

Finally, onto the floppy drive. It is a very special model (Citizen V1DC-65B) or, at least, this is the first time I come across it. When I tried to format a floppy in the hope that it would work I found that it was not OK. Sometimes it was able to read something but most of the time you could hear the motor making noises and struggling with the old belt. Therefore, I opened it to see if it was possible to install a new one.

The first thing is to unscrew the upper shield to have access to the guts. It is not necessary to remove the frontal plastic bezel at all for this.

floppy drive of the Amstrad Notepad NC200

The second thing you need to do is to lift the head of the drive and remove the floppy support. It is very easy, just pull it back a little bit and it will come out. The springs that keep the floppy in place are also part of a mechanism that allow easy removal of the whole support. Funnily enough, the drive has a LED but you cannot see it when the machine is working because there is no hole in the bezel. It is very important not to forget to lift the head (not yours, the black plastic thing in the middle of the drive). Otherwise you could easily damage it and it is very delicate.

first inside of the Amstrad Notepad NC200 floppy drive

And here is the inner part of the drive once you remove the screws of the motor. The belt was in pretty bad condition and not elastic anymore.

second inside of the Amstrad Notepad NC200 floppy drive

The belt needs to be 2 mm wide, otherwise it will not fit into the grooves of the guide bushings. There is more tolerance with the thickness. The original is 2 mm wide and something like 0.5 mm thick, but the substitution belt is 2 mm wide and 2 mm thick. Regarding the diameter, something around 70 mm should work. You do not want it much smaller because then it would be necessary to overstretch the rubber and that would not be good. Luckily, although the new belt is thicker it does not touch anything in the board.

third inside of the Amstrad Notepad NC200 floppy drive and belt

To assemble the drive you need to follow the same steps but in reverse order. Remember to lift the head to put back the floppy support! Once it was ready I formatted a few discs, saved several files and loaded them back. Everything was fine.

screen of the Amstrad Notepad NC200

The next step was to detail the plastic case a little bit and reassemble the NC200. Then I did some more testing before closing the machine for real. Before you do this remember to align the slider that adjusts the contrast with the variable resistor on the board, otherwise you may have to open it again.

thest of the Amstrad Notepad NC200 keyboard

And here it is, happy and working! There was nothing extremely wrong with it, but quite a few little things.

main menu of the Amstrad Notepad NC200  tetris being played on Amstrad Notepad NC200

As I said at the beginning, there is something worth mentioning regarding the plastic used to make this computer. I found it not particularly robust when compared to a regular Amstrad CPC or Plus. My NC200 had a crack near the keyboard that I am sure appeared when somebody tried to open it in the past. There are also some small marks in the case because the same or other person introduced something in the gaps between the two shells, probably metallic, to separate them. I repaired the crack with epoxy and it is fine now but you really want to be careful when opening the laptop. What I did was to fill it with resin and add some extra epoxy around. It is all in the inner part of the shell and, therefore, not visible from the outside.

crack in the Amstrad Notepad NC200 keyboard

There is still a final tip: the NC200 needs 7.5V and 1A to run. There are many PSUs suitable for it but the polarity is reversed when compared to the CPC range. That is, outside you have the positive and inside the negative. This is written in the case of the machine but many people have burnt the internal fuse because of this. Keep it in mind and remember that if somebody sells on e-bay a not working unit this is possibly the case and most likely it can be repaired.



BDCIron teste Great Gurianos, Addams Family, Big'O'Full demo, et une autre vidéo

-

BDCIron traite de Great Gurianos et Addams Family ainsi que de la démo Big'O'Full demo.

Voir la news suivante avec plus de détails sur Great Gurianos.

Dans sa dernière vidéo du 24 février BDCIron traite des jeux suivants :

  • Buggy Boy
  • Carlos Sainz
  • Chevy Chase
  • Continental Circus
  • Miami Cobra GT
  • Power Drift
  • Super Monaco GP
  • Turbo Cup
  • Twin Turbo V8
  • Wacky Races
  • Potsworth & Co
  • lets Go !
  • la démo Points Barres




Musique du jeu Great Gurianos mixée (Amstrad CPC et C64) par Vincent GR

-

Je ne connaissais pas ce jeu, mais la musique Amstrad CPC et C64 mixée de Great Gurianos par Vincent GR est bien sympathique.

Il y a une vidéo Youtube de jeu de Great Gurianos par Amstrad Maniaque.

Le jeu a été un des premiers écrits par David Perry, c'est un port d'un jeu d'Arcade de Taito : Gladiators. Il est sorti en 1987 par Elite Systems.




Colour Personal Computing Fanzine numéro 2 sur Kickstarter par James Ford

-

Eight bit Magazine n'est pas la seule revue à informatique à utiliser Kickstarter, il y a aussi Colour Personal Computing Fanzine numéro 2 par James Ford.

Ce numéro de 40 pages contient:

  • conversion de cartouches GX4000 avec C4CPC
  • une analyse de la carte d'extension M4 board
  • un article exclusif en avance des Mémoires 8bit (merci Mr_Lou!)
  • partie 2 d'un article sur l'émulation de lecteur de disquettes, ajouter un écran LCD et un buzze au GoTek
  • le nouveau site web Everygamegoing Reviews qui teste les derniers jeux Amstrad CPC dont Magica, Imperial Mahjong, Adios a la casta et plus
  • partie 2 d'un texte d'action/drame : The (Alex) Van Damm Chronicles





Pour plus d'informations, allez sur la page principale